Corrosion Preventative Coating

Lomg-term corrosion prevention in a transparent single component coating

CORROSION PROOFER™

CPT-201

CPT-201 is a time-proven coating that provides excellent protection to all metal substrates. It leaves a firm film that provides extreme corrosion protection. The film has extreme resistance to salt water and salt spray, making this coating particularly useful in drilling, marine, industrial and offshore corrosion proofing applications. The film dries transparent. CPT-201 provides optimal long-term corrosion protection for ferrous and non-ferrous metals exposed to harsh environments, as it deposits a molecular layer of corrosion inhibitor that creates a durable, long lasting bond. CPT-201 comes in aaersol can format, 5-gal, 55-gal or 278-gal.

Dry Film Thickness mil: 2-3 mil (50-75 �m)

Dry Time: 30 min.

VOC g/l (lbs/gal): 190 grams per liter

Solids %: 55

Coverage ft 2 /gal (m 2 /l): 300 (7.4)

Application Method: Spray, dip, roll, brush

Topcoatability: Yes

Length of Protection: 5 years

Dry-to-touch film properties allow protected metal surfaces to be easily handled.

No surface preparation, as it will adhere to the pre-rusted, oily and dirty surfaces.
A thixotropic liquid; self-healing; resistant to sag, run-off and flow.
Excellent U.V. resistance, providing optimal outdoor protection without cracking or chipping after prolonged exposures to sunlight.
Universal protection for ferrous and non-ferrous metals and alloys.
The non-conductive film with high resistivity and insulating properties effectively prevents galvanic corrosion between dissimilar metals.
Has moisture-displacing characteristics and penetrating film characteristics
Thermally stable over a broad range of temperatures.

Applicable to the following specifications: MIL-C-0083933A and MIL-C-16173D

Appearance: brown viscous liquid
Coverage: 300-330 ft 2 /gal @ 3 mils (7-8 m 2 /l @ 75 microns)
Drying-to-touch time: 30 minutes
Shelf Life: 24 months @ 75�F (24�C)
Flash point: Concentrate form 232�C

Excellent salt spray protection
Excellent outdoor protection
Multimetal protection
Excellent UV resistance
Moisture displacing
Cured film is heat stable up to 392F (200C)
Conforms to MIL-C-16173D (Grades 1 and 2)
NATO 6850-66-132-5848
NATO 6850-55-132-6099
NSN 8030-00-62-6950

APPLICATIONS

Maintenance:

Protection of structural plants and equipment

Mothballing refineries, power plants and chemical plants

External surfaces of large machines, pipes, pumps, heat exchangers, etc. - during standby, field storage or operation

Shipping & Storage:

Covered or uncovered packages shipped overseas and/or during extended on-site storage. Storage of metals � interior and exterior of vessels

Construction:

Steels for fabrication, structural or storage and in field use

Concrete reinforcing bars; aluminum or steel sidings joints; profiles, bridges, structures, casings and steel roofs

Marine & Offshore:

External and internal surfaces of offshore platforms and equipment.

Ballast tanks, storage and process vessels

Castings; pumps; valves and compressors; heat exchangers, boilers, turbines and transformers.

Wire rope, cable, wire and chains.

Internal and external surfaces of drill pipe, sucker rods and other tubular products.

OEM:

Internal and external surfaces of engines, bearings, brake drums and engine components.

Frames, cabs, stampings, castings and plate steel.

Transmission, hydraulic pistons, cylinders and equipment undercoating

Pipe coating
Vessels
Drill Pipe
Parts storage
Underbody coating
Wire rope
Steel plate
Machined parts

METHOD OF APPLICATION

Dipping, spraying or brushing are recommended methods of applying - Film thickness of 2 mils to 5 mils. CPT-201 can be applied over pre-rusted or oily surfaces.

Corrosion Prevention Products Brochure

Click here to go to the online store