About UsContact Us
SEI Logo
TechButton ProductsButton ResearchBtn Private Label Brochures VidButton StoreButton
SEI Logo

CONCRETE CURING AGENT

GCC-300

Construction projects demand curing system that is ASTM approved and meets VOC requirements, is easy to apply, quick drying and cost competitive.  Meeting these needs was the driving force behind the development of the GCC-300 curing compound. GCC-300 is a ready to use formulation.  GCC-300 provides for the complete development of concrete's wear resistance and strength properties while lowering concrete's temperature.  GCC-300 will not discolor the concrete nor affect the bonding of other finishes applied there over.  GCC-300 is available in a wide range of packing options to meet the varying needs of today's projects.

 

  • Provides for complete development of concrete's wear resistance and strength properties
  • Prevents efflorescence, dusting and spalling
  • Low moisture transmission rates

APPLICATION

Apply GCC-300 finished product as soon as possible after the concrete receives its final finishing, just as the water sheen disappears.  Thoroughly mix GCC-300 by air or mechanical methods before use to ensure best results and ease of application.  Apply by brush, roller or sprayer; however, application by sprayer is preferred.  The sprayer should generate at least 40 psi (275 kPa) and spray 1/2 gallon (2 L) of material per minute. Apply at 200-400 sq.ft./gal. or less depending on the mix design, method of application or specification requirement.  Contact SEI Chemical or your distributor for assistance in product application techniques. Coat uniformly – leave no gaps. To clean equipment: Mineral spirits

PRODUCTS & SPECIFICATIONS

GCC-300 is a premium hydrocarbon 100% resin based curing compound that is easily applied and dries quickly to a uniform film.  SEI introduced GCC-300 to offer contractors the performance of a resin based products at cost levels associated with hard to use wax base cures.  The product is ideal for use on projects where a wax-based product would be used only for cost reasons.  GCC-300 resists moisture loss to the lowest levels to ensure the concrete reaches maximum hardness, wear resistance and strength properties.  Meets the requirements of ASTM C-309 Type II Class A&B, AASHTO M-148 Type II, FAA, VOC requirements.

PACKAGING & STORAGE

GCC-300 is available in 5-gallon pails 55-gallon drums and 278-gal totes.  One year shelf life.

HEALTH & SAFETY

  • Use of gloves, goggles and other protective clothing is advised when using this product.
  • Flash Point: None

Concrete Curing Agent Data Sheet

(You will need Adobe's free Acrobat Reader to view this file.)

 


Home | Store | Technology | Products | R & D | Private Label | Brochures | Videos | Policies | Contact Us