Limestone Cleaner
AR-104
Limestone
The AR-104 is a heavy-duty
cleaner/restorer and can be used on a wide variety of stone surfaces
safely and effectively. This product is mostly effective on limestone,
marble and travertine, removing accumulated surface contaminates, mineral
deposits and atmospheric stains. It can be used for both interior and
exterior applications. This product does not contain any harsh solvents,
phosphates, caustics or acid.
- Pale yellow appearance
- Low ammonia odor
- Flash Point: None
- pH: 11-11.5
- lbs/gallon: 8.5-8.8
- Environmentally friendly
- Biodegradable
- User-safe
- VOC and AQMD compliant
AR-104 should be generously
brushed or sprayed onto a dry surface being cleaned from the bottom
up. Saturate surface for optimum cleaning. Let solution stand for approximately
5-15 minutes, depending on surface and contaminates, moderately agitate
and then rinse thoroughly. There is no need to mask off glass or metal
surfaces and since the rinse water is pH neutral, there is no need for
collection of the wastewater.
It is often impossible to
know all of the surface conditions of the surface before cleaning. Before
a project is started, it is important that a small test area be done
typical of the surface to be cleaned.
Limestone
Cleaner Product Data Sheet
Limestone
Cleaner MSDS (Password protected)
(You will need Adobe's free Acrobat
Reader to view these files.)
Click here to go to the online store
|